ADDITIVES FOR BITUMINOUS CONGLOMERATES
nimble_asset_liquid_three-1

POLYCYKLE PF60

DESCRIPTION
Polymer based on polyolefin and high absorbency fiber agglomerated in fine granules, able to modify the characteristics of the bituminous conglomerate directly during the production phase, usable in conglomerates with a high bitumen content, it allows to stabilize the mixtures and at the same time improve their characteristics, allows to achieve high increases in the physical-mechanical
characteristics of the conglomerate without modifying the production parameters, the polymers and fibers used in the PF65 and the particular format allow easy dispersion and mixing already at the normal production temperatures of the bituminous conglomerate.

APPLICATION
POLYCYKLE PF60 can be used on any bituminous conglomerate (base, binder, wear layer) and is particularly suitable for the production of SMA type conglomerates.

DIRECTIONS OF USE
POLYCYKLE PF60 is added directly into the mixer of the production plant during the production phase of the conglomerate, using an automatic dispenser or dosing it manually.

DOSAGE
The dosage percentages depend on the nature of the aggregates and the type of bitumen, normally POLYCYKLE PF60 is used from 6% to 10% on the weight of the bitumen.

STORAGE
POLYCYKLE PF 60 can be stored for 24 months in its original closed packaging, at a temperature
between 5 ° C and 30 ° C.

SAFETY
For more information on classification, protective measures and measures in case of fire, please refer to the product safety data sheet, available on request.

WARNINGS
The advice on the methods of use correspond to the current state of our knowledge and do not imply the assumption of any guarantee and / or responsibility on the final result of the work. Therefore, they do not exempt the customer from the responsibility of verifying the suitability of the products for the intended use and purposes through preventive tests.