DESCRIPTION
Latest generation ecological additive to regenerate, facilitate workability, activator of adhesion and antioxidant. The use of POLYGEN ACF ECO reduces the viscosity of bituminous mixtures containing high percentages of milled material (RAP). Its correct dosage allows the properties of the bituminous binder (virgin bitumen + milled bitumen) to be brought back to the typical values of a mixture without milled material, reduces the processing temperature and the presence of the adhesion activator and reduces the stripping phenomena and aging of the conglomerate.
APPLICATION
POLYGEN ACF ECO can be used in any type of hot mix.
DIRECTIONS OF USE
POLYGEN ACF ECO is added directly to the mixer of the production plant during the production phase of the conglomerate, using an automatic dispenser.
DOSAGE
The dosage of POLYGEN ACF ECO varies according to the percentage of milled material added to the mix and above all by the operating conditions (temperature, distance from the construction site, humidity of the milled product, etc.). The percentage of product to be dosed can vary from 0.2% to 0.3% of the weight of the milled product used.
STORAGE
POLYGEN ACF ECO can be stored for 24 months in its original closed packaging, at a temperature between 5 ° C and 30 ° C. Depending on the storage temperature, the product may vary viscosity, but its characteristics are not altered.
SAFETY
The product does not present specific risks, but for more information on classification, protective measures and measures in case of fire, please refer to the product safety data sheet, available on request.
WARNINGS
The advice on the methods of use correspond to the current state of our knowledge and do not imply the assumption of any guarantee and / or responsibility on the final result of the work. Therefore, they do not exempt the customer from the responsibility of verifying the suitability of the products for the intended use and purposes through preventive tests.
